Annealing
650 – 700°C, slow cooling in furnace
Hardening
830 – 870°C, oil or air quenching
Tempering
540 – 680°C depending on desired hardness
- DIN 2714
Standards : X210CrW12
| Element | Content (%) |
|---|---|
| Carbon (C) | 0.50 – 0.60 |
| Silicon (Si) | 0.10 – 0.40 |
| Manganese (Mn) | 0.65 – 1.00 |
| Chromium (Cr) | 0.80 – 1.20 |
| Molybdenum (Mo) | 0.45 – 0.60 |
| Nickel (Ni) | 1.50 – 1.80 |
Grade Brief
DB6 is highly recommendable for Close Die Forgings due to its characteristics of high wear-resistance, extra toughness , high hardness which is achieved with Cr-Ni-Mo-V high graded alloys. The equivalent grade DB6 / L6 / SKT4 normally used as a pre hardened condition. The standard hardness is 360 to 430 BHN. DIN 2714 is the upgraded version of DIN 2713 for better performance of dies. We supply Die blocks as the extra Forging Reduction & Upsetting with Double tempered to achieve the better Ultrasonic quality.
DB6 Steel is a tool steel grade that comes under the DIN EN ISO 4957 standard. Due to its excellent combination of wear resistance, additional toughness, and high hardness which are attained using Cr-Ni-Mo-V high graded alloys, DB6 Steel is highly recommended for Close Die Forgings. Therefore, DB6 Steel is the material of choice in the automotive, aerospace, metalworking, and tool and die sectors. We provide die blocks as an additional forging reduction and upsetting step with double tempering to improve ultrasonic quality.
Mode of Supply
Kuber Multi Metals is the largest stockiest and supplier of DB6 Steel in flat, square and round bar. We provide steel in all sizes as your requirements. DB6 die steel is available in flat, square and round shape. Consult our team who will assist you for DB6 steel query.
Steel Properties
The special Hot Work Pre hardened Steel with good toughness and high ware resistance. Die Steel is normally supply in hard, quenched & tempered and also in annealed condition in special case. Usually its working hardness is 360-430 BHN. This steel grade is the upgrade version of DB6 / DIN 2713 / AISI L6 for better performance.
| Property | Value (Approx.) |
|---|---|
| Tensile Strength | 800 – 1000 N/mm² |
| Yield Strength | 650 – 800 N/mm² |
| Hardness (Annealed) | 250 – 300 HB |
| Hardness (After Heat Treatment) | 360 – 400 HB |
| Impact Resistance | Very High |
Physical Properties
The exact values of these physical characteristics depend on the composition, heat treatment, and manufacturing procedures used to create DB6 steel, so take them with a grain of salt. For detailed details on the physical characteristics of a certain grade of DB6/DIN 2714/AISI L6 steel, it is always advised to refer to the manufacturer’s datasheet or specifications.
| Temp. Range (°C) | 20–100 | 20–200 | 20–300 | 20–400 | 20–500 | 20–600 |
|---|---|---|---|---|---|---|
| Expansion Coefficient | 12.1 | 13.1 | 13.2 | 13.5 | 14.1 | 14.3 |
| Temperature (°C) | 20 | 350 | 700 |
|---|---|---|---|
| Conductivity | 35.0 | 39.0 | 36.0 |
Heat Treatment & Processes
Grade equivalent
| Standard | Grade |
|---|---|
| DIN | 1.2714 |
| AISI / SAE | L6 |
| JIS | SKT4 |
| IS (India) | DB6 |
Application
Forging dies, Press tools, Die casting molds, Hot shear blades, Extrusion dies, Industrial tools for hot working
Addition to other Grades
HCHCR-D2 Steel , HCHCR-D3 Steel , P20+Ni Steel , P20 Steel , DB6 Steel , H13 Steel, H11 Steel, H21 Steel, H10 Steel, H12 Steel, M2 Steel, M35 Steel, M42 Steel, T1 Steel, DIN 2379 Steel, DIN 2080 Steel, DIN 2738 Steel, DIN 2311 Steel, DIN 2714 Steel, DIN 2344 Steel , DIN 2343 Steel, DIN 2581 Steel, DIN 2365 Steel, DIN 2606 Steel, DIN 3343 Steel, DIN 3243 Steel, DIN 3247 Steel, DIN 3355 Steel AISI D2 Steel, AISI D3 Steel, AISI P20+Ni Steel, AISI P20 Steel, AISI L6 Steel, AISI H13 Steel, AISI H11 Steel, AISI H21 Steel, AISI H10 Steel, AISI H12 Steel, AISI M2 Steel , AISI M35 Steel, AISI M42 Steel , AISI T1 Steel
